So right now, after we have done setting up our Raspberry Pi, the first time we open it, we might
get this.
Welcome to Raspberry Pi screen.
So this is the IP address for this device and we can use it if you are doing any type of networking.
It's important to know what is the Raspberry Pi IP address.
Let's click on Next Choose the Country and the Time Zone.
I'm going to leave everything as it is for next now here you can change the Raspberry Pi password.
Remember, the default passport is rasberry, so if you don't want to change it, you just retype raspberry
again and click on next if you want to change the password, for there is probably the password here,
but make sure that you don't really forget to try to type it down on a paper or on some external note
so that you don't forget.
So here it is asking us if there is a black borders on the screen and which we do have.
So we need to take this box.
If you can see black borders here and this black borders should go away whenever you start your reply.
Now, next, you need to choose your Wi-Fi network and just choose the right Wi-Fi network, you have
to have the password in.
So I'm going to type my own password here.
Click on next.
Let us make sure that it connects.
Yes.
So here we if we need to update the software, which is necessary, actually, and I really recommend
it.
So click on next and let it do the update.
Now, this will take a while, so I recommend you leave it and get back when it is ready.
Now you're going to get that the Raspberry Pi is set up and you need to restart.
So let us restart here.