Hello, guys, and welcome back.
This lecture is actually about Raspberry Pi, which is a mini computer that is the Linux based.
We are going to learn how we can install an operating system on that device and then this will open
up to us.
A lot of possibilities to do with that board.
So let us get started in order to flash your OS on your Raspberry Pi.
You need to install Raspberry Pi imager.
So we have Googled Raspberry Pi s August Papy imager.
And now we can just click on download for Windows and wait for it to be installed.
Now, after it is done, installing or downloading, what we need to do is actually choose an OS and
in my case, I am going to just choose a Raspberry Pi or s 32 bits.
And I need to choose Irish, and here I have connected my SD card to my laptop, there is multiple ways
to connect.
You stick out your laptop either.
If your laptop supports Estcourt to be directly plugged in, you can just plug it into your laptop or
you can get the small SD card reader, USB reader that you connect to your laptop, put your SD card
and that's it.
Once you are connected, once you have connected you addicott your laptop in either of the methods,
you should be seeing you SD card being mounted here.
In my case, I have a 64 gigabyte as the card, which is I'm going to be using here.
I recommend always using around 64 gigabytes because you have an OS and there is a lot of things that
you need to install.
So 64 could be ideal in this case.
Now, after you click on the stories, you just click on your right and you wait until the operation
is done.