Hello, guys, and welcome back.
As you can see here, we have installed Endi, which is Android emulator, and as you can see, we have
all the ads that we see on a regular Android device.
Could be a mobile phone, a tablet.
This is a fully functional Android sitting on your Windows 10 or Windows seven or whatever windows you
are using this.
And you can also work on the Mac.
And for now we are using it in order to communicate with our hardware, which is the notebook.
You know, as long as your laptop or computer is connected to the Internet.
This Android emulator will be connected to the Internet.
So if you click on play store, you're going to see that play store is actually working and connected
to the Internet with your account here.
It tells you you need to sign in.
All you need to do is give it to email and password and you will be able to log on here.
That's a great.
Now, the app I want to install is called The Blink.
Blink is a very, very easy way in order to connect.
Will not see you.
So I'm going to install it.
This can be connected with a lot of other hardware, but basically, since we are working with not MCU,
we are going to link it with not MCU and I'm going to show you how we can do that.
Now, if we click on Open, so let us create a new account, give it your email address and give it
any password you want and click on sign up.
Here we go.
Now, this app is not entirely free.
You can do some basic stuff with it, but otherwise you need to pay if you want to add additional functionality.
But it works great for our basic app, which will teach us a little bit about Iot.
So click on call.
Got it.
And let us add a new device.
Now, let's say that this project name is called The Blink My.
Note MCU, and you can choose the device right here, as you can see, there is a lot of devices.
There is Michael Adrenals, there is no pie, there is not MCU, let's see, there's Raspberry Pi,
there is a lot of microcontrollers that are supported.
For me, what's important is on the not MCU.
Going to choose it.
OK, I want connected to Wi-Fi, you can choose the theme if you want it to be dog or light, let's
choose dog create.
Now there is a talking that will be sent to your email address.
Now, this talking.
We're going to go there.
Copy it.
And we're going to pasted in our sketch.
Don't forget, copy the talking from the email address and then we're going to use it in our Aldwin
the idea sketch.
OK, like, OK.
And that's it.
This is our basic app, no, let us add submenus, click on this, plus let us add a button and well,
if we double click on this button, we will see the configuration here.
You can choose which bin is it connected to?
Is it a digital pen?
Is it an analog pen?
Is it a virtual bin for us?
For now, we need a digital pen.
And do you remember we've seen that not MCU built in is sitting on the 16 now.
There is no this 16.
So though this should mean that there is a meaning for these 16 that we saw on Google so that as Google
this again, I'm going to write node MCU build and let the PIN number and let us click on this first
link will see that it is I 016.
However, this job I 016 is not the sixteen, this is the zero.
OK, so this is the naming of the this microcontroller right here.
It's called Jubei 016 only microcontroller of all ever when we met.
But to not MCU to this whole board it's going to turn into the zero.
Let us go back there.
Let us choose the zero.
Click OK, and these are the ranges that we can use, so the output for digital, so for digital signals,
we have two values, either zero or one.
Now let's say we choose analog.
We need to choose a value between zero one thousand twenty three.
OK, now here we can choose is it a switch or is it a push-button?
Let's say that it is a switch so that we pretend it's zero, we press it again, it's one if we choose
a Bush, if we keep progressing, it's one if we release it, it's zero.
So this is why we're going to give it a choice of a switch.
We will go back and this is now ready and it will be searching for a microcontroller, which we will
go back to the idea sketch, configure it, and we are going to test this together.