All right, all right, so now we're ready to start our final project.
So now we're ready to design our project, the way we are going to design and interconnect all of these
components is using a block diagram.
That's a great let us start doing that.
So you let us create a new block diagram and we're going to put everything you know, as you know,
we have a huge library of components already designed right here throughout this course.
And, well, we are going to take all of these remember to be in files actually in order to see all
of them.
We are going to take whatever we need from this library and then we're going to put it here.
But we need to learn how we can convert a file to a block diagram file.
So now, as you can see in the diagram, we need some flip flops, we need some Multiplex's, we need
our Aliyu and we need our FZ.
So let us start by our Aliev.
This is my alley, right?
We have designed this before, I'm going to set it as a top level entity and compile it.
All right.
So we have compiled it.
Now, let's open the URL.
You let me close all of these right now since we don't need them yet.
Now, you are in this alley, right?
Go to file, create update.
And I want you to create a simple file for current file.
OK, now this Aliyu is actually a block diagram we can go to you, let us get a plug diagram.
If you go to component's right here, the simple tool, go to project.
And this is your Alea.
I mean, we've already done this bit, Adir.
So you already know how to do it, but it is just a reminder.
So this is your value.
OK, now we need our multiplex, sir.
So we go to a multiplex here.
This is my multiplex.
Right.
And it is an eight with multiplex, sir.
This is what we need for our design, set it as a top level.
And copilot, we can save this as you dataflow.
We are saving the block diagram, actually, it's not that we are saving the multiplex here.
All right.
We have simulated it.
Now, let's go open the file like that, go to file the create update and symbol file.
And here we go.
Now, if we go back.
To our block diagram.
We will see it right here.
So this is my multiplex, her.
What else do I need?
Well, we still need the three flip flops that we will use in this design, so we'll go to the we here
set it as a top level comp..
All right, so let us go to the flip flop file and create a simple file, and we're good now.
Let us come back and let us put.
One.
As the output of the new.
And we have to.
Flip flops here.
OK, so by now we have finalized putting the main components, we did not put the controller yet.
We did not start programming the FSM yet.
However, we did put the main data flow that we need.
Right.
And the upcoming lectures are going to continue designing the rest of the circuit.